Ammunition Storage & Transport Boxes
Stackable plastic storage and transport boxes for organised inventory. Published external and internal dimensions, wall thickness, lid and base depth, carton packing data.
An ammunition storage and transport box is a stackable, lidded container used to keep small issued items organised, separated and protected from dust and moisture in a depot or a vehicle. KeXin manufactures these boxes in PP with published external and internal dimensions, wall thickness and carton packing data, mainly from the 0, 1 and 6 series.
Key points
- Fifty-six models fall in the 3 L to 20 L storage band with a wall thickness of 3.0 mm or more.
- Stacking behaviour is governed by rim geometry and wall thickness, both published per model.
- Carton dimensions and pieces-per-carton are published for sixty-four models, so container planning does not need a guess.
- Interior layouts can be divided with foam or with moulded partitions.
Storage engineering, not marketing
A storage box is a volume, a load path and a closure. The volume tells you whether the contents fit. The load path tells you whether fifty boxes on a pallet will crush the bottom ten. The closure tells you whether dust gets in during six months of warehousing. Those three numbers, plus the mass of the empty box, are what a buyer actually needs, and they are what we publish.
In this family
Sorted by internal volume. Each card leads with the measured internal envelope, because that is the number you size on.
8 Series Protective Case
External 384 × 366 × 208 mm
8 Series Protective Case
External 405 × 325 × 210 mm
8 Series Protective Case
External 436 × 356 × 187 mm
0 Series Protective Case
External 460 × 367 × 126 mm
8 Series Protective Case
External 410 × 370 × 165 mm
8 Series Protective Case
External 384 × 366 × 183 mm
9 Series Protective Case
External 433 × 263 × 209 mm
6 Series Protective Case
External 413 × 336 × 168 mm
8 Series Protective Case
External 405 × 325 × 185 mm
8 Series Protective Case
External 405 × 325 × 180 mm
8 Series Protective Case
External 405 × 320 × 175 mm
8 Series Protective Case
External 436 × 356 × 157 mm
See all 68 Ammunition Storage & Transport Boxes models in the filterable database →
In this family: 6 sub-classifications
The family is not a flat list. Buyers come to us with a sub-type in mind, so each one below is a real filter over the same product database rather than a separate marketing page.
How to specify this family
Fixed installation
Choose a box whose external height matches your racking pitch, and check the narrow internal width if the shell tapers.
Mobile use
Prefer a four-latch configuration and a lid that can be removed cleanly with gloves.
Inventory control
Specify a foam or partition layout so that a shortage is visible without opening compartments.
Questions on Ammunition Storage & Transport Boxes
What is an ammunition storage box?
A lidded, stackable container used to store and move small issued items in an organised, protected way. In commercial supply it is also used generically for any compact stackable box of similar construction.
What features matter most for organised storage?
Internal volume, a lid and base depth split that suits the item height, stacking rims, latch count, and an interior that can be divided.
How do these boxes protect against moisture and dust?
The shell is moulded without perforation, and the lid meets the base on a continuous rim. A seal can be added as an option on models with a wall thickness of 3.0 mm or more. We do not state an IP rating without a test.
What materials are used?
PP is used for the storage band because it resists oils, solvents and repeated impact, and it stays tough at low temperature.
Can the boxes be customised?
Yes — colour, logo, foam layout, partitions, latch count, lock hasps and identification plates.
Applications, adjacent families and deeper reading
Ammunition & Inventory Transport
Military
Industrial Equipment
