Medical Equipment Cases
Transport cases for medical devices, diagnostic and laboratory equipment, emergency kits and field hospital stores. Custom foam, wipe-down interiors, OEM available.
A medical equipment case protects a device or a kit through the last mile: from a warehouse to a clinic, a hospital ward, an ambulance, a field post or a mobile laboratory. The specification priorities are cleanability, fast visual verification of contents, protection of the transducer or optical interface, and a mass that a single clinician can carry.
Key points
- Seventy-one models exceed 20 L internal volume for device-plus-consumable kits.
- Smooth closed-cell foam surfaces are used where the interior must be wiped down.
- Probe, transducer and ultrasound heads are supported on their body, never on the cable or the face.
- Nineteen wheeled models cover the equipment sets that a single clinician should not lift.
Cleanability changes the interior
Open-cell foam absorbs a spill and cannot be cleaned. Where a case enters a clinical space, we specify closed-cell PE with a smooth skin, or a moulded tray with a cover film, so the interior can be wiped with the same agents used on the device. That single decision rules out the cheapest option and is the one customers most often get wrong after the first audit.
In this family
Sorted by internal volume. Each card leads with the measured internal envelope, because that is the number you size on.
T Series Protective Case
External 843 × 592 × 415 mm
T Series Protective Case
External 843 × 592 × 335 mm
T Series Protective Case
External 830 × 445 × 374 mm
T Series Protective Case
External 733 × 505 × 357 mm
T Series Protective Case
External 677 × 535 × 364 mm
8 Series Protective Case
External 843 × 592 × 212 mm
T Series Protective Case
External 677 × 535 × 304 mm
8 Series Protective Case
External 1356 × 154 × 408 mm
T Series Protective Case
External 610 × 610 × 270 mm
T Series Protective Case
External 588 × 475 × 353 mm
8 Series Protective Case
External 733 × 505 × 230 mm
T Series Protective Case
External 612 × 427 × 355 mm
See all 71 Medical Equipment Cases models in the filterable database →
In this family: 6 sub-classifications
The family is not a flat list. Buyers come to us with a sub-type in mind, so each one below is a real filter over the same product database rather than a separate marketing page.
How to specify this family
Clinical environment
Closed-cell foam or a wipeable tray; no open-cell pluck foam.
Emergency use
Latches that open with one hand and a lid that stays up unaided.
High-value device
Deeper base foam, a separate transducer zone, and a documented drop test if required.
Questions on Medical Equipment Cases
What type of case suits portable medical equipment?
A hard shell with a wipeable interior, a layout that separates the device from consumables and cables, and a mass that a single clinician can carry over the distance they actually have to carry it.
How should medical equipment be protected during international transport?
Inside a rigid case with a foam carrier under the device body, sealed against dust and moisture for sea or air movement, and palletised so the case is not the outermost layer.
Can the interior be customised for different devices?
Yes. We cut to a device drawing, a sample, or a photograph of the current packaging, and we can qualify the layout against a specified drop height.
Which devices do you currently supply cases for?
Diagnostic and imaging peripherals, patient monitors, defibrillators and emergency kits, laboratory analysers, ultrasound systems, sampling and field laboratory kits.
Applications, adjacent families and deeper reading
Medical & Laboratory
Military
Field & Deployment
