Military Equipment Cases
Large-format military equipment cases from 30 L to 139 L internal volume for electronics, communications, optics, power and medical field stores.
Military equipment cases are the large-format end of the range: shells from roughly 30 L to 139 L internal volume used to move complete systems rather than accessories. These are the models where wheels, a telescopic handle, four-latch closures and a deep base foam layer stop being options and become requirements.
Key points
- Twenty-four models exceed 40 L internal volume; ten exceed 60 L.
- Nineteen T-series models add a telescopic handle and wheels at these volumes.
- Empty case mass reaches 15.3 kg before contents on the largest shells.
- Deep-base lid and base splits of 44 + 320 mm are published on the largest T-series models.
Where the big cases are specified
Deployed communications sets, field hospital consumables, generator and power distribution kits, survey and navigation systems, drone ground stations with spare batteries and propellers — these are all systems that arrive as a case, not as a box. The specification problem is usually the same: the system fits, but the cabling does not, or the system fits but two people cannot lift it comfortably.
We solve this by publishing the lid and base depth split alongside the internal dimensions, and by recommending a foam layout that reserves a defined accessory channel before the primary cavity is cut.
In this family
Sorted by internal volume. Each card leads with the measured internal envelope, because that is the number you size on.
T Series Protective Case
External 843 × 592 × 415 mm
T Series Protective Case
External 843 × 592 × 335 mm
T Series Protective Case
External 830 × 445 × 374 mm
T Series Protective Case
External 733 × 505 × 357 mm
T Series Protective Case
External 677 × 535 × 364 mm
8 Series Protective Case
External 843 × 592 × 212 mm
T Series Protective Case
External 677 × 535 × 304 mm
8 Series Protective Case
External 1356 × 154 × 408 mm
T Series Protective Case
External 610 × 610 × 270 mm
T Series Protective Case
External 588 × 475 × 353 mm
8 Series Protective Case
External 733 × 505 × 230 mm
T Series Protective Case
External 612 × 427 × 355 mm
See all 45 Military Equipment Cases models in the filterable database →
In this family: 8 sub-classifications
The family is not a flat list. Buyers come to us with a sub-type in mind, so each one below is a real filter over the same product database rather than a separate marketing page.
How to specify this family
Lift
Above 12 kg of packed mass, specify wheels and a handle, or split the system across two cases.
Cabling
Reserve 60-80 mm of one dimension for coiled cable and power leads.
Pallet
Check the external footprint against a 1200 x 1000 mm or 1200 x 800 mm pallet before choosing a large shell.
Questions on Military Equipment Cases
What equipment goes in a large military equipment case?
Communications and network systems, optics and observation equipment, navigation and survey instruments, medical and field hospital equipment, power generation and distribution, measurement and test sets, and field tool kits.
How heavy are the largest cases?
The heaviest empty shell in the current database is 15.32 kg with an internal volume of 139 L. Each product page publishes the measured empty mass where available.
Do you make wheeled versions?
Yes. Nineteen T-series models include a telescopic handle and wheels, with the telescopic travel height published per model.
Can a large case be split into compartments?
Yes, with CNC foam, partition walls, or a combination of a moulded base carrier and a pluck-foam top.
Applications, adjacent families and deeper reading
Military
Defense
Field & Deployment
Medical & Laboratory
